Anti-static Floor Maintenance in Computer Room in Winter

Now it is very cold winter in the north of China, and the static electricity in the computer room is getting more and more serious. At this time, it is extremely important to install the anti-static floor correctly!
Here let Jinhai Floor show you several common anti-static floors on the market.
According to the needs of the machine room, we generally divide the anti-static flooring into direct-lay and raised access anti-static flooring. The raised floor is generally divided according to the difference between the base material and the veneer material. Common substrates are steel, aluminum, composite, particleboard (wood), calcium sulfate, etc. The veneer materials include anti-static tiles, melamine (HPL), PVC, etc.

Kinds of anti-static floor

(More news about raised floor, welcome to learn more on website: https://www.titanflor.com/product/)

Requirements of anti-static flooring

So what are the specific requirements of the anti-static floor for the surrounding environment?

1.Temperature requirements anti-static floor

In the room with anti-static flooring: the temperature is controlled at 15-35 degrees Celsius and the humidity is controlled at 45%-75%RH.
If put the floor in the high temperature or low temperature for a long time, it’s surface will peel or break.

2. Maintenance requirements

(1) Forbid to use sharp tools to directly construct and operate on the floor to prevent damage to the anti-static performance and aesthetics of the surface;

(2) During use, people can’t jump directly to the floor from a high place. At the same time, do not use brutal operations when handling equipment and damage the floor;

(3) When moving the equipment on the raised floor, it is forbidden to directly push the equipment on the board to scratch the floor. The correct method is to lift the equipment for transportation;

(4) When there is heavy equipment in the machine room, the equipment should be dropped directly without the base. Can not directly fall on the floor and cause long-term load-bearing deformation of the floor;

(5) When maintaining the equipment under the floor, use a suction plate to suck up the floor for operation. Moreover, don’t use sharp tools to disassemble and assemble;

(6) During the maintenance, use a vacuum cleaner or a semi-dry mop to keep the board surface clean, especially not to spill liquid on the floor;

(7) Properly humidify the machine room in autumn and winter. So that we can maintain the floor regularly with anti-static wax to ensure the long-term use.

xueyanfloor