New project finished installation at the beginning of June with our Jinhai flooring. (Feedback by our Korea clients).
This is the process of installing antistatic floor tiles for electronic parts handling factories and laboratories. Project areas about 220m2.
Here are the steps of the installation as reference:
Step 1:
Clean the construction site:
Step2:
Spread the conductive adhesive evenly on the floor and cure for 10 to 20 minutes.
Wait for the adhesion to rise.
Step3:
Glue the tiles, and put copper strips inside the antistatic tiles to ground.
Step4:
Use a tile V-shaped cutter, cut about 2/3 of the floor to open V-Shaped groove.
Step5:
Laying welding rods
Step6:
Test electronic resistance
Welcome to visit this link about electronic resistance test:
https://www.youtube.com/watch?v=fy4hCQCPjq8
Step 7:
Remove the dust on the installed antistatic tile and cover it with conductive wax
About detailed installation, welcome to visit this video:
https://www.youtube.com/watch?v=3E69wAQDbec
Should you have any question about installation or the antistatic tiles, please feel free to contact us.
Different regional standards are different, the required tiles’ sizes are also different. The popular and…
ESD vinyl flooring is widely used in clean rooms, manufacturing & assembly workshops of electronic…
Our Jinhai factory mainly produces static conductive PVC flooring. People usually use the floor as…
Static electricity is everywhere, and it will cause varies damage. Some have almost no effect,…
PVC conductive tiles ESD floor installation for the workshop of telecommunication devices Latest new workshop(…
In addition to the compulsory CE certification, the products of resilient floor manufacturers from Europe…