People think that there is anti-static effect after installing anti-static PVC flooring, but it is not. The reason why the floor can be anti-static is because the grounding treatment under the floor, then what is the anti-static PVC flooring grounding method?
Epoxy epoxy grounding
When laying copper nets, leave a wiring head in each corner to connect with the grounding wire. If there are multiple grounding wires in a large area, at least one grounding wire should be set every 100 square meters. The best condition is A grounding system, which is designed separately to distinguish it from the grounding system of the building.
Straight grounding
When laying the copper mesh, leave a wiring head in each corner to connect with the grounding wire. (Since the copper mesh is thin and easy to break, it is recommended to use a flat copper wire at the grounding end. It is better to bury the copper wire directly under the floor and copper. If the network is connected to a large area, it is necessary to set up at least one grounding wire per 100 square meters. It is best to design a grounding system separately to distinguish it.
Raised floor grounding
(1) Simple grounding treatment: Since the overhead type anti-static floor is entirely conductive, we only need to connect the grounding wire in the room to the bracket below the floor, and achieve anti-static effect.
(2) Standard grounding treatment: Before installing the anti-static floor, firstly lay a copper row with a size of 30x3mm on the ground. Only one copper row should be laid on each side. When laying, should connect each copper row. Then connect with the grounding wire in the room. When installing the anti-static floor support frame, connect the support frame to the copper bar every 2 meters with copper wire. This will make the anti-static effect better.
Anti-static PVC flooring is mainly used in computer room, special ward, precision workshop and other spaces that have special requirements for static electricity. Therefore, anti-static PVC floor is also a kind of PVC floor. However, we can also adding some conductive componets to make rubber flooring be anti-static.
